Electroválvula para aire comprimido 5 vías 3 posiciones
S9581-RFE
390,63 €
- Motor-pump coupling.- Maximum Shaft Diameter 25 mm.- Type Star 75 X 16.- Inside Diameter Star 31 mm.- Mounts star A75/16.- Maximum Torque 16,8 kgm.- Maximum Revolutions. 7000.- Weight Kgs 0,9.
76,44 €
MW 5/3 c/c 1/4" 90° lever valve
80,82 €
Valve3/2 normally closed thread1/8"
78,75 €
MW pneumatic cylinder ø 80 C-250 D/E
302,10 €
Inline flow divider tq 33-A 3 HAWE
- Online flow divider. - Flow rate 45 l/min. - 1/2" female thread. - Carbon steel material.
432,25 €
- With decompression. - D 5116 (02-2016-1.1). - Mounting on base plate not included. - Service pressure pmax: 500 bar. - Control flow Qmax: 2 l/min.
437,20 €
Male conical fitting 1/4 "pipe Ø 4 x 6
Nickel-plated brass quick connector. Swivel Tapered BSP Male Threads. Tube diameter: 4 x 6. 1/4 "thread.
2,20 €
APPLICATIONS:
- Use of refillable bottles.
- Have the power of a traditional compressor in your hands.
- They can be used with staplers-nailers that work in a range between 4-8 bar.
- Regulator, hose and bottle can be worn on the belt and use any single shot pneumatic tool.
Nailers.
Staplers.
Pruning shears.
Grease guns.
Silicone guns.
Pneumatic inflators.
- The enormous energy contained in the compressed air bottle gives great autonomy to work with your pneumatic machines where an air compressor does not reach.
CHARACTERISTICS:
- It adjusts to your belt facilitating its autonomy.
- Full power for single shot machines such as brad or pin nailers, roofing, finishing, framing, staplers, grease guns and pruning shears.
- Universal connector that fits any standard pneumatic tool.
- No more loading with heavy compressors or long hoses.
- Charges in less than two minutes.
- The complete set weighs only 2.2 kg.
- Environmentally friendly. Bottles are reused and noise is minimal.
- Save time and effort without losing quality.
AUTONOMY IN USE WITH THE FOLLOWING MACHINES:
- NAILER - COMBINED STAPLER: 900 shots. For normal nail type 12 (50mm.) And staple type 90 (40mm.)
- PNEUMATIC STAPLERS: 1,500 shots. Normal type 80, 71, 64, 97 (16 mm.)
- NAIL STAPLERS 14: 1,200 shots. Normal type 14 (50 mm.)
- MICRO BRANDS-PINS NAILING MACHINE: 1,500 shots. 0.6 x 35 mm.
- PNEUMATIC RIVETER: 750 shots
- PNEUMATIC PRUNING SCISSORS: 750 - 800 shots. Up to 35mm. cutting section