Electroválvula para aire comprimido 5 vías 3 posiciones
S9581-RFE
390,63 €
- Motor-pump coupling.- Maximum Shaft Diameter 25 mm.- Type Star 75 X 16.- Inside Diameter Star 31 mm.- Mounts star A75/16.- Maximum Torque 16,8 kgm.- Maximum Revolutions. 7000.- Weight Kgs 0,9.
76,44 €
MW 5/3 c/c 1/4" 90° lever valve
80,82 €
Valve3/2 normally closed thread1/8"
78,75 €
MW pneumatic cylinder ø 80 C-250 D/E
302,10 €
Inline flow divider tq 33-A 3 HAWE
- Online flow divider. - Flow rate 45 l/min. - 1/2" female thread. - Carbon steel material.
432,25 €
- With decompression. - D 5116 (02-2016-1.1). - Mounting on base plate not included. - Service pressure pmax: 500 bar. - Control flow Qmax: 2 l/min.
437,20 €
Male conical fitting 1/4 "pipe Ø 4 x 6
Nickel-plated brass quick connector. Swivel Tapered BSP Male Threads. Tube diameter: 4 x 6. 1/4 "thread.
2,20 €
PRECAUTIONS:
Low tendency to the formation of sludge, varnish, deposits and carbon residue
High lubricity attached to a higher power anti-wear, antiherrumbre and anti-corrosion.
Your employment translates into a perfect conservation of valves and a minimum wear of the moving parts.
Excellent thermal and chemical stability.
Fully compatible with gaskets and seals usually used.
High flash point, providing a higher level of security.
DESCRIPTION:
Lubricating oils mineral-based, formulated with special additives and detergent-free for the lubrication of air compressors and vacuum pumps.
PROPERTIES AND ADVANTAGES:
- Low tendency to the formation of sludge, varnish, deposits and carbon residue, keeping the system in an optimum state of cleanliness.
- High lubricity, power anti-wear and anti-corrosion, providing a perfect conservation of the elements lubricated (piston, screw, crankshaft, valves, etc.).
- Minimum formation of foam, avoiding wear on the surface by the phenomenon of cavitation.
- Excellent ability of desemulsión, minimizing the contact of moisture with the metal surfaces lubricated and to prevent the formation of rust.
- Excellent thermal and chemical stability, ensuring a high service life (up to 2000 hours depending on quality of the compressed air, presence of contaminants and humidity).
- Fully compatible with gaskets and seals usually used.
- High flash point, providing a higher level of security.
- Excellent leakage in compressors rotary.
APPLICATIONS
- Mechanisms and cylinders in compressors.
- Air compressors alternative, plunger or piston.
- Compressors rotary vane and screw.
- Air compressors-one-stage (2-3 bar) or multiple stages (up to 8 bar), air-cooled or by water.
- Hydraulic systems requiring fluids free of ash, due to its additive package free of zinc.
SPECIFICATIONS / QUALITY LEVEL:
Compressors | Hydraulic systems |
DIN 51506 VB-L, VC-L / RV-L | DIN 51524 / 2 (HLP) |
ISO 6521-L-DAA / DAB / DAH / DAG | DENISON HF-0, HF-1, HF-2 |
AFNOR NF E 48-603 HM |
TECHNICAL DATA:
PHYSICO-CHEMICAL CHARACTERISTICS | STANDARD | VALUE |
SAE grade | SAE J300 | 30/40 |
Grade ISO | ISO 3448 | 100 |
Density at 15 ° C, Typical (kg/l) | ASTM D-1298 | 0,88–0,91 |
Viscosity index, Min | ASTM D-2270 | 95 |
Freezing point (°C) | ASTM D-97 | <-15 |
Flash point COC (°C) | ASTM D-92 | >220 |
Sulphated ash (% wt) | ASTM D-874 | <0,01 |
Resistance to oxidation, Carbon Conradson, % | DIN 51352 p. 2 | <3,0 |
Corrosion to copper (3h,100 ºC) | ASTM D-130 | 1a |
PRESENTATION:
Containers of 5 L and Drums of 200 L.