Cart  

No products

0,00 € Shipping
0,00 € Total

Cart Check out

worldwide shipping
Visítanos en Metalmadrid 2019

New products

All new products

Hydraulic cylinder cartridge-type HSE and HSA Hawe

Properties and advantages:

- Compact design

- Operating pressure up to 500 bar

Areas of application:

- Clamping systems and clamping

- Fastening systems

- Machine-tool

Working pressure Pmax = 500 bar.

More details...

108,45 €

The cylinder clamping type HSE is a cylinder to tighten. the type HSA is a cylinder for the screw. In the devices can transmit very large forces in a mounting space to a minimum.

The hydraulic cylinders HSE and HSA are elements of simple efeto, fitted with springs recovery units, for use in hydraulic devices and many other hydraulic systems, when it is necessary to concentrate a large energy in a very small space in the case of short trips.

- Construction of devices, sueción and mooring of pieces of work (production installations and mounting).

- Machine-tool construction, mooring carts and guides, to immobilize round tables, etc

- Shaping without chip, bending, stamping, punching and cutting.

The surface of the steel shell of the cylinder tension is treated against corrosion. The pistons divers with a cap inside are hardened and ground. The flow of oil is done through the main body.

MODEL

PISTON

Ø d

mm

Career

h

mm

Sealing

of the housing

Pressure of return spring (bar)

Fixing

Mass

weight approx. Kg

ExtendedWithdrawn

Screwed into a main body

HSE12212


2Cutting edge630.05
HSE1255

Sealing ring

20x24x1.5

DIN 7603-Cu

6.530.06
HSE1288520.08
HSE163
16

3Cutting edge5.530.08
HSE1688

Sealing ring

24x29x2

DIN 7603-Cu

73.50.09
HSE1612126.53.50.12
HSE204204Cutting edge63.50.14
HSE201010

Sealing ring

30x36x2

DIN 7603-Cu
730.2
HSE2015155.72.50.25
HSE2020206.52.50.3
HSE245245

O-ring

37x2.5xNBR

90Sh and ring

support

steel

64.50.25
HSE24151573.50.4
HSE242020640.5
HSA32203220

O-ring 34x3

NBR 90 Sh

51

Bolted to a main body

1.6
HSA40254025

O-ring 44x5

NBR 90 Sh
4.512.5

Name: single acting Cylinder with spring return.

Mounting position: Indistinct.

Surface treatment: it is Not allowed on the piston axially and in a state retracted. If available, retain by means of butt outside. So do always the lateral forces on the piston.

Hydraulic fluid: hydraulic Oil according to DIN 51.524, parts 1-3; ISO VG 10 to 68 according to DIN 51519. Margin of viscosity: min. approx. 4; max. approx 1500 mm2/s. optimum Service: approx. 10 ... 500 mm2/s. Also suitable for hydraulic fluids biodegradable of the type HEPG (polialquilenglicol) and HEES (synthetic ester) at operating temperatures of up to approx. + 70°C.

Temperatures: Ambient: approx. -40 ... +80°C; Oil: -25 ... +80°C, pay attention to the margin of viscosity. Allowed a terperatura boot up to -40°C.