Cart  

No products

0,00 € Shipping
0,00 € Total

Cart Check out

Tlf
WORLDWIDE SHIPPING

New products

  • Manufacture and repair of hoses

    Manufacture and repair of hoses

    Specialists in the manufacture and repair of hoses of low, medium and high pressure.

  • Blue polyurethane tube pack

    Blue polyurethane tube pack

    Blue polyurethane flexible tube. 25, 50 and 100 meters. Indivisible pack.

    12,50 €

  • RING NBR ø 85-70-8

    RING NBR ø 85-70-8

    Seal made of NBR (Nitrile) 70 shore hardness. Retainers are manufactured in viton, silicone, or other materials consult price. The dimensions of the seal are determined by the outer diameter, inner diameter and height. Temperatures supported: - NBR (NITRILE) -30 to 120 ° C - SILICONE -50 to 180 ºC - VITON -30 to 230 ° C (High temperature)

    10,75 €

  • Hawe LHK 33 G 21 brake valve with hydraulic release

    Hawe LHK 33 G 21 brake valve with hydraulic release

    Working pressure P max. : 60 ... 130 bar / 131 ... 320 bar / 321 ... 360 bar. Flow Q max. : 60 l / min.

    515,75 €

  • Useful for mounting flanges

    Useful for mounting flanges

    Tool for installing seal rings and scrapers. Product recommended by manufacturer of sealing rings.

    93,06 €

  • Coating thickness gauge KC-120 B

    Coating thickness gauge KC-120 B

    Measured non-metallic coatings on metal surfaces.

    63,15 €

  • Filtration equipment F + R + L 1/8 "with pressure gauge XGWL2-01

    Filtration equipment F + R + L 1/8 "with pressure gauge XGWL2-01

    Filter group, plus regulator, plus 1/8 "threaded compressed air lubricator. With built-in pressure gauge. Maximum working pressure: 10 bar. Maximum pressure resistance: 15 bar. Operating temperature: 5-60ºC. Regulation range: 0.5 bar - 8.5 bar.

    58,80 €

  • ACD-50 coupling

    ACD-50 coupling

    Nominal diameter of 7 mm.

    2,33 €

All new products

Reducer male 3 "male 2" 1/2 Figure 245

Measures:

Male: 3 ".

Male: 2 "1/2.

More details...

GRA0123212

39,25 €

FEATURES:

- Manufactured under the UNE EN 10242 standard.

- Union threads according to ISO 7-1 (DIN 2999 / BS 21).

- Nominal diameter DN under ISO 6708.

- Dimensions according to ISO 49 and DIN 2950.

- Standard working pressure 25 bars.

- Temperatures between -20 and 300 ° C.

- The mass of the zinc coating is greater than 500 gr / m2.

- Minimum average thickness of galvanized 70 µm.

- Protected by an antioxidant varnish.

- The surfaces of the EO accessories are free of polycyclic aromatic hydrocarbons.

UTILIZATION:

- For hot and cold water, oil, air, gas and steam

- Fire facilities.

30 other products in the same category :