90° elbow threaded nut M-36X200 to hydraulic pipe Ø 25 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-36X200.- For hydraulic pipe Ø 25 outside.- Heavy series.- Material forged steel.- Bichromated anti rust treatment.
27,25 €
90° elbow threaded nut M-30X200 to hydraulic pipe Ø 22 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-30X200.- For hydraulic pipe Ø 22 outside.- Light series.- Material forged steel.- Bichromated anti-oxidation treatment.
15,46 €
90° elbow threaded nut M-30X200 to hydraulic pipe Ø 20 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-30X200.- For hydraulic pipe Ø 20 outside.- Heavy series.- Material forged steel.- Bichromated anti rust treatment.
16,75 €
90° elbow threaded nut M-36X200 to hydraulic pipe Ø 28 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-36X200.- For hydraulic pipe Ø 28 outside.- Light series.- Material forged steel.- Bichromated anti rust treatment.
25,58 €
Solenoid valve for compressed air 5 ways 3 positions
S9581-RFE
390,63 €
90° elbow threaded nut M-42X200 to hydraulic pipe Ø 30 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-42X200.- For hydraulic pipe Ø 30 outside.- Heavy series.- Material forged steel.- Bichromated anti rust treatment.
35,96 €
Mini hydraulic power pack type HR 080
537,80 €
90° elbow threaded nut M-52X150 to hydraulic pipe Ø 42 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-52X200.- For hydraulic pipe Ø 42 outside.- Light series.- Material forged steel.- Bichromated anti-oxidation treatment.
51,29 €
The HSE type clamping cylinder is a screw-in cylinder. type HSA is a screwdriver cylinder. Very large forces can be transmitted in the devices in a minimal installation space.
The HSE and HSA hydraulic cylinders are single effect elements, provided with recovery springs, for use in hydraulic devices and many other hydraulic systems, when it is necessary to concentrate large energies in a very small space in case of short distances.
- Construction of devices, suction and clamping of work pieces (production and assembly facilities).
- Construction of machine tools, mooring of carriages and guides, to immobilize circular tables, etc.
- Forming without chip removal, bending, stamping, punching and cutting.
The surface of the steel housing of the tensioning rollers is treated against corrosion. Diver pistons with internal stop are hardened and ground. The oil flow is through the main body.
| MODEL | PISTON Ø d mm | Career h mm | Hermetization of the casing | Spring recovery pressure (bar) | Fixation | Mass weight approx. Kg | |
| Extended | Retracted | Threaded into a main body | |||||
| HSE122 | 12 | 2 | Cutting edge | 6 | 3 | 0.05 | |
| HSE125 | 5 | Ring seal 20x24x1.5 DIN 7603-Cu | 6.5 | 3 | 0.06 | ||
| HSE128 | 8 | 5 | 2 | 0.08 | |||
| HSE163 | 16 | 3 | Cutting edge | 5.5 | 3 | 0.08 | |
| HSE168 | 8 | Ring seal 24x29x2 DIN 7603-Cu | 7 | 3.5 | 0.09 | ||
| HSE1612 | 12 | 6.5 | 3.5 | 0.12 | |||
| HSE204 | twenty | 4 | Cutting edge | 6 | 3.5 | 0.14 | |
| HSE2010 | 10 | Ring seal 30x36x2 DIN 7603-Cu | 7 | 3 | 0.2 | ||
| HSE2015 | fifteen | 5.7 | 2.5 | 0.25 | |||
| HSE2020 | twenty | 6.5 | 2.5 | 0.3 | |||
| HSE245 | 24 | 5 | O-ring 37x2.5xNBR 90Sh and ring support of steel | 6 | 4.5 | 0.25 | |
| HSE2415 | fifteen | 7 | 3.5 | 0.4 | |||
| HSE2420 | twenty | 6 | 4 | 0.5 | |||
| HSA3220 | 32 | twenty | O-ring 34x3 NBR 90 Sh | 5 | 1 | Bolted onto a main body | 1.6 |
| HSA4025 | 40 | 25 | O-ring 44x5 NBR 90 Sh | 4.5 | 1 | 2.5 | |
Designation: Single acting cylinder with spring return.
Mounting position: Indistinct.
Surface treatment: It is not allowed on the piston in the axial direction and in the retracted state. If available, retain by external stop. Likewise, always avoid lateral forces on the piston.
Hydraulic fluid: Hydraulic oil according to DIN 51.524, parts 1-3; ISO VG 10 to 68 according to DIN 51519. Viscosity range: min. approx. 4; max. approx 1500 mm 2 / s. Optimal service: approx. 10 ... 500 mm 2 / s. Also suitable for biodegradable hydraulic fluids of the HEPG (polyalkylene glycol) and HEES (synthetic ester) type at operating temperatures up to approx. + 70 ° C.
Temperatures: Ambient: approx. -40 ... +80 ° C; Oil: -25 ... + 80 ° C, pay attention to the viscosity range. Allowable start-up temperature down to -40 ° C.
The prices shown on the website do not include VAT
The shipping costs are calculated automatically in the cart according to the weight of the product and the place of delivery
+34 682 460 188
