90° elbow threaded nut M-36X200 to hydraulic pipe Ø 25 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-36X200.- For hydraulic pipe Ø 25 outside.- Heavy series.- Material forged steel.- Bichromated anti rust treatment.
27,25 €
90° elbow threaded nut M-30X200 to hydraulic pipe Ø 22 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-30X200.- For hydraulic pipe Ø 22 outside.- Light series.- Material forged steel.- Bichromated anti-oxidation treatment.
15,46 €
90° elbow threaded nut M-30X200 to hydraulic pipe Ø 20 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-30X200.- For hydraulic pipe Ø 20 outside.- Heavy series.- Material forged steel.- Bichromated anti rust treatment.
16,75 €
90° elbow threaded nut M-36X200 to hydraulic pipe Ø 28 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-36X200.- For hydraulic pipe Ø 28 outside.- Light series.- Material forged steel.- Bichromated anti rust treatment.
25,58 €
Solenoid valve for compressed air 5 ways 3 positions
S9581-RFE
390,63 €
90° elbow threaded nut M-42X200 to hydraulic pipe Ø 30 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-42X200.- For hydraulic pipe Ø 30 outside.- Heavy series.- Material forged steel.- Bichromated anti rust treatment.
35,96 €
Mini hydraulic power pack type HR 080
537,80 €
90° elbow threaded nut M-52X150 to hydraulic pipe Ø 42 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-52X200.- For hydraulic pipe Ø 42 outside.- Light series.- Material forged steel.- Bichromated anti-oxidation treatment.
51,29 €
Reduced male-female hexagonal counter thread, figure 246, brass threaded fitting that adapts one end of a female thread to another with a larger male thread.
It is a fitting made of brass that allows the end of a larger male tube or accessory to be adapted to a smaller female one. It is formed by a cylindrical end with an external thread and another end with a larger internal thread with an external hexagonal plane for tightening.
- Brass is an alloy composed mainly of copper and zinc, with an approximate proportion of 60% copper and 40% zinc.
- Manufacture by hot stamping with brass
- According to standard UNE-EN-12165 CW617N
- Suitable for drinking water.
- Tensile strength 350N / m / m2 Min.
- Elongation 15% min.
- Hardness HB 80% approx.
- It does not alter at temperatures between -100ºC and 200ºC nor does it degrade with light.
- Corrosion resistant.