90° elbow threaded nut M-52X150 to hydraulic pipe Ø 42 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-52X200.- For hydraulic pipe Ø 42 outside.- Light series.- Material forged steel.- Bichromated anti-oxidation treatment.
51,29 €
90° elbow threaded nut M-52X150 to hydraulic pipe Ø 38 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-52X200.- For hydraulic pipe Ø 38 outside.- Heavy series.- Material forged steel.- Bichromated anti rust treatment.
122,42 €
90° elbow threaded nut M-45X200 to hydraulic pipe Ø 35 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-45X200.- For hydraulic pipe Ø 35 outside.- Light series.- Material forged steel.- Bichromated anti-oxidation treatment.
37,50 €
Single-acting pneumatic cylinder with piston diameter 25 mm
- Single-acting pneumatic cylinder. - Front spring. - Piston diameter Ø 25 mm. - Stroke 50 mm. - Material of the stem and sleeve stainless steel. - Working temperature 0ºC to +80ºC. - Working pressure from 1 Bar to 10 Bar.
75,45 €
- PVDA-LAN pressure reducing cartridge valve
- Mounting in T-21A cavity. - Pilot operated. - Adjustment using allen screw. - Adjustment from 7 to 210 Bar. - Nitrile gasket material.
287,86 €
Pressure regulating valve for threading in block Hawe CDK 3 51
- Pressure regulator valve for threading into a block. - Block not included. - Flow rate 12 l/min. - Pressure regulation from 15 to 165 BAR. - Adjustable with tool.
226,00 €
Flexible 1/4" double textile braid tubing
SELLING PRICE PER METER: 1 UNIT = 1 METER
4,63 €
Flexible tubing 3/16" double textile braid
SELLING PRICE PER METER: 1 UNIT = 1 METER
5,96 €
MAIN FEATURES:
This multifunctional mobile center, born from the union of various equipment, allows to perform all the operations necessary to prepare hydraulic rigid pipes: cutting, internal and external deburring, bending, pre-assembly of rings conforming to DIN 2353 standard, 37° flaring of rigid stainless steel (AISI 316 TI) and carbon steel (ST 37,4) pipes for fittings conforming to SAE and JIC standards from 6 to 42 mm diameter with 4 mm thickness. This equipment is equipped with a small compressor for internal cleaning of the tubes.
TECHNICAL FEATURES:
PREMOUNTING 24°. | 6-42x4 mm (0.236"-1.654 "x0.158") |
37° BORE | 6-42x4 mm (0.236"-1.654 "x0.158") |
CUT | MAX Ø 100 mm (3.937") |
CURVATURE | 6-42x4 mm (0.236"-1.655 "x0.158") |
CLEARING | MAX Ø 42x4 mm (1.654 "x0.158") |
MATERIALS | AISI 316 TI - ST 37.4 |
COMPRESSOR | 220 L/MIN. |
WEIGHT | 305 KG (672 Lbs) |
DIMENSIONS L x D x H | 1,515 x 1,000 x 1,210 mm (59.6" x 39.3" X 47.6") |
ACCESSORIES | |
SAFETY PROTECTION | Including |
CONTROL PANEL | Including |
OIL | Included (5 Lt.) |
Optional | |
SPECIAL VOLTAGE | Optional |
215,52 €
70,00 €