Adapter male JIC thread 1"5/8 to male thread 1"7/8 UNF
- Closing part JIC cone 37º. - UNF part closure using O-ring. - Carbon steel material. - Dichromate surface treatment.
25,88 €
Adapter male JIC thread 1"5/8 to male thread 1"5/8 UNF
- Closing part JIC cone 37º. - UNF part closure using O-ring. - Carbon steel material. - Dichromate surface treatment.
18,17 €
Adapter male JIC thread 1"5/8 to male thread 1"5/16 UNF
- Closing part JIC cone 37º. - UNF part closure using O-ring. - Carbon steel material. - Dichromate surface treatment.
23,08 €
Adapter male JIC thread 1"5/16 to male thread 1"5/8 UNF
- Closing part JIC cone 37º. - UNF part closure using O-ring. - Carbon steel material. - Dichromate surface treatment.
52,17 €
90° elbow threaded nut M-18X150 to hydraulic pipe Ø 12 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-18X150.- For hydraulic pipe Ø 12 outside.- Light series.- Material forged steel.- Bichromated anti-oxidation treatment.
7,13 €
90° elbow threaded nut M-16X150 to hydraulic pipe Ø 10 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-16X150.- For hydraulic pipe Ø 10 outside.- Light series.- Material forged steel.- Bichromated anti rust treatment.
7,67 €
90° elbow threaded nut M-16X150 to hydraulic pipe Ø 8 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-16X150.- For hydraulic pipe Ø 8 outside.- Heavy series.- Material forged steel.- Bichromated anti rust treatment.
5,75 €
90° elbow threaded nut M-14X150 to hydraulic pipe Ø 8 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-14X150.- For hydraulic pipe Ø 8 outside.- Light series.- Material forged steel.- Bichromated anti-oxidation treatment.
5,88 €
- Unlike other flexible couplings in which the intermediate members support bending stresses and are more prone to premature wear, only the flexible teeth of ROTEX © couplings are subjected to this pressure. This offers the added advantage that each tooth tolerates higher loads. The elastomer deforms under excessive load and speed. Sufficient space must be left for dilation (see drawing to the right).
- The maximum angle of torsion with ROTEX © couplings of any size is 5º and they can be installed vertically or horizontally.
Size | Components | Star (Piece 2) | |||
92 Sh A (yellow) | 98 Sh A (red) | 64 Sh D (green) | |||
90 | 1 | 2400 | 3600 | 4500 | |
1 B |
Dimensions (mm) | |||||||||||
Hole d (min-max) | general | ||||||||||
L | l 1: l 2 | AND | B | S | D H | D Z | D Z1 | d H | D | N | |
0 - 110 | 245 | 100 | Four. Five | 3. 4 | 5.5 | 200 | 218 | 230 | 100 | 160 | 62 |
295 | 125 | 200 | - |