+34 682 460 188
Low speed, high torque orbital (gerotor) hydraulic motor with reinforced shaft seal.
Availability : Bajo pedido, normalmente enviado en 1 semana
MOMR160
Availability : Bajo pedido, normalmente enviado en 1 semana
MOMR160
- Shaft: Cylindrical 25 mm diameter with 8 mm wide key.
- Flange: Type A2 (SAE A) with 82.5 mm diameter centring and 106.4 mm distance between the centres of the 2 bores.
- Pad width (gerotor): 27.8 mm.
- Displacement: 159.6 cm3.
- Side connections: 1/2" GAS threaded.
Drainage:
- Maximum speed: 375 rpm (intermittent: 470 rpm).
- Maximum torque: 300 Nm (intermittent: 390 Nm, peak: 460 Nm).
- Maximum power output: 10 kW (intermittent: 12.5 kW).
- Maximum engine pressure drop: 130 bar (intermittent: 175 bar, peak: 225 bar).
- Maximum oil flow: 60 litres/minute (intermittent: 75 litres/minute).
- Maximum starting pressure with unloaded shaft: 7 bar.
- Minimum starting torque at maximum continuous working pressure: 240 Nm.
- Minimum starting torque at maximum intermittent pressure: 320 Nm.
- Intermittent duty value is allowed a maximum of 10% per minute.
- Peak duty value is allowed maximum 1% per minute.
The prices shown on the website do not include VAT
The shipping costs are calculated automatically in the cart according to the weight of the product and the place of delivery