90° elbow threaded nut M-24X150 to hydraulic pipe Ø 16 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-24X150.- For hydraulic pipe Ø 16 outside.- Heavy series.- Material forged steel.- Bichromated anti-oxidation treatment.
11,50 €
90° elbow threaded nut M-22X150 to hydraulic pipe Ø 15 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-22X150.- For hydraulic pipe Ø 15 outside.- Light series.- Material forged steel.- Bichromated antioxide treatment.
7,83 €
90° elbow threaded nut M-22X150 to hydraulic pipe Ø 14 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-22X150.- For hydraulic pipe Ø 14 outside.- Heavy series.- Material forged steel.- Bichromated anti rust treatment.
10,54 €
90° elbow threaded nut M-20X150 to hydraulic pipe Ø 12 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-20X150.- For hydraulic pipe Ø 12 outside.- Heavy series.- Material forged steel.- Bichromated antioxide treatment.
7,13 €
- Air filter. - Height: 125 mm. - Exterior Diameter 128 mm. - Interior Diameter: 64 mm. - Internal Diameter 2: 64 mm. - Weight: 0.540.
25,12 €
90° elbow threaded nut M-36X200 to hydraulic pipe Ø 25 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-36X200.- For hydraulic pipe Ø 25 outside.- Heavy series.- Material forged steel.- Bichromated anti rust treatment.
27,25 €
90° elbow threaded nut M-30X200 to hydraulic pipe Ø 22 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-30X200.- For hydraulic pipe Ø 22 outside.- Light series.- Material forged steel.- Bichromated anti-oxidation treatment.
15,46 €
90° elbow threaded nut M-30X200 to hydraulic pipe Ø 20 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-30X200.- For hydraulic pipe Ø 20 outside.- Heavy series.- Material forged steel.- Bichromated anti rust treatment.
16,75 €
Poseen una válvula de retención que aisla el sistema y solo filtra cuando es necesario, lo que los convierte en una solución ideal que protege las aplicaciones de bajo flujo con operaciones intermitentes. Las válvulas de retención proporcionan una ligera presurización del sistema que permite una filtración controlada sin acumulación excesiva de presión. El sistema filtr sólo cuando se lo presiona para hacerlo, y luego el aire se limpia y se seca antes de introducirlo en el sistema, asegurando un espacio libre limpio y seco. Este mecanismo de control también evita la saturación prematura del gel de sílice y prolonga la vida útil del filtro, un problema que los respiradores desecantes estándar no se enfrentan con tanta facilidad a la humedad extrema.
Ø UNIT | CONNECTION SIZE | GEL AMOUNT |
64MM | 3/8" BSP | 0.3 / 0.1 |