Hose connection with 3/8" male thread for hose Ø 8 mm
- Hose coupling with male thread.- Male thread 3/8"- For hose Ø 8 mm.- Material brass.
1,10 €
Hose coupling with 2" male thread for hose Ø 50 mm
- Hose coupling with male thread.- Male thread 2"- For hose Ø 50 mm.- Material brass.
31,71 €
Hose coupling with 3/4" male thread for hose Ø 20 mm
- Hose coupling with male thread.- Male thread 3/4"- For hose Ø 20 mm.- Material brass.
3,65 €
Hose coupling with male thread 1/2" for hose Ø 8 mm
- Hose coupling with male thread.- Male thread 1/2"- For hose Ø 8 mm.- Material brass.
0,65 €
Hose coupling with male thread 1/2" for hose Ø 12 mm
- Hose coupling with male thread.- Male thread 1/2"- For hose Ø 12 mm.- Material brass.
1,90 €
Hose coupling with male thread 1" 1/4 for hose Ø 30 mm
- Hose coupling with male thread.- Male thread 1" 1/4- For hose Ø 30 mm.- Material brass.
14,39 €
Hose connection with 1" male thread for Ø 25 mm hose
- Hose connection with male thread. - 1" male thread - For Ø 25 mm hose. - Brass material.
6,30 €
Vávula direccional EM 22 V-G 24
Las electroválvulas de asiento pertenecen al grupo de las válvulas distribuidoras.- Como válvulas de asiento cónico son estancas y están exentas de aceite derecuperación cuando están cerradas.
184,25 €
APPLICATION
The main element of a progressive system is the lubricant distributor. Distributors ZP-A are used to divide and meter the lubricant in the central systems of lubrication total loss oil, grease and liquid in the systems of recirculation of oil suitable for smaller installations, as for example installations of machines and medium and large.
PRODUCT FEATURES
Progressive distributors up to 24 outlets
Possibility of electronic monitoring
Measured volume variable from 0.1 cm3
Fat, liquid fat and oil
FUNCTION
Distributors ZPA consist of several individual segments (at least 3 in the standard version) that are screwed on each other and sealed against each other.
Depending on the arrangement within the distributor, are available for the following types of segments:
- Initial segment, or segment To
The average or segment M
- Segment final-or E
The distributor ZP-A has the task to divide the lubricant volume (oil or grease) received under pressure into portions and
are supplied successively up to 24 points of sale as possible. This is achieved due to pistons which are moved by the lubricant under pressure, and controlled the force by others. The pistons move into their final positions, and the lubricant ahead of the piston is supplied successively to the points of lubrication. The distributor works as long as it is supplied with lubricant. Upon request, the distributor is equipped with non-return valves built in. These non-return valves, which are integrated into the outputs of the distributor, have the advantage that the distributor works reliably, even in the case of small volumes of lubricant pressures and back pressure higher in terms of the material of the line is flexible. In the event that a visual monitoring operation of the distributor is necessary or desired, the distributor must be ordered with indicators of movement. For the extended version with indicators of movement, it is possible to perform an additional power control operation by an electronic control system of switch monitoring.