1" 1/2 BSP nut with 30° reverse seating cone R1, R2 and 4SP
- Fitting to press on hose.- Japanese series, TOYOTA type- 1"1/2 BSP nut nut thread.- For hose inner Ø 38,1 mm.- Inverted seat cone 30°.- Carbon steel material.- Bichromated surface treatment.
41,55 €
3/4" BSP nut with 30° inverted seat cone R1, R2 and 4SP
- Fitting to press on hose.- Japanese series, TOYOTA type- 3/4" BSP nut thread.- For hose Ø 19 mm inside.- Inverted seat cone 30°.- Carbon steel material.- Bichromated surface treatment.
11,53 €
1" BSP nut with 30° reverse seating cone R1, R2 and 4SP
- Fitting to press on hose.- Japanese series, TOYOTA type- 1" BSP nut nut thread.- For hose Ø 25,4 mm.- Inverted seat cone 30°.- Carbon steel material.- Bichromated surface treatment.
32,38 €
1" 1/4 BSP nut with 30° reverse seating cone R1, R2 and 4SP
- Fitting to press on hose.- Japanese series, TOYOTA type- Thread nut nut 1"1/4 BSP.- For hose inner Ø 31,8 mm.- Inverted seat cone 30°.- Carbon steel material.- Bichromated surface treatment.
26,60 €
1/2" BSP nut nut with 30° inverted seat cone R1, R2 and 4SP
- Fitting to press on hose.- Japanese series, TOYOTA type- Thread nut nut 1/2" BSP.- For hose inner Ø 12,7 mm.- Inverted seat cone 30°.- Carbon steel material.- Bichromated surface treatment.
5,25 €
Cylindrical nut 3/8" BSP with reverse seating cone 30° R1, R2 and 4SP
- Fitting to press on hose.- Japanese series, TOYOTA type- 3/8" BSP nut thread.- For hose Ø 9,5 mm.- Inverted seat cone 30°.- Carbon steel material.- Bichromated surface treatment.
16,90 €
Low pressure 60° BSP conical seat nipple for hose inner Ø 19 mm
- Low pressure 60° BSP conical seat nipple.- Nipple for 3/4" nut (NOT INCLUDED)- For 19 mm inner Ø hose.- Carbon steel material.- Without nut.- Bichromated surface treatment.
4,30 €
Forged elbow adapter 90° adjustable male thread 1"1/2 BSP seat 60°
- Male 90° forged elbow with 1"1/2 BSP thread, 60° seat. - 1"1/2 BSP adjustable male and sealing joint. - Forged with stamp. - Material carbon steel. - Bichromate surface treatment.
151,95 €
Type | Eccentric lock |
Mounting | Flange |
Take | G 1/8 " |
Installation position | Indifferent, but in steps of 90º |
Room temperature | -20 ° C to + 80 ° C |
Minimum pressure | 2 bar |
Nominal pressure | 8 bar |
Control pressure | Equal to operating pressure |
Shank diameter | 25 |
Locking force | ≥ to cylinder force |