Electroválvula para aire comprimido 5 vías 3 posiciones
S9581-RFE
390,63 €
- Motor-pump coupling.- Maximum Shaft Diameter 25 mm.- Type Star 75 X 16.- Inside Diameter Star 31 mm.- Mounts star A75/16.- Maximum Torque 16,8 kgm.- Maximum Revolutions. 7000.- Weight Kgs 0,9.
76,44 €
MW 5/3 c/c 1/4" 90° lever valve
80,82 €
Valve3/2 normally closed thread1/8"
78,75 €
MW pneumatic cylinder ø 80 C-250 D/E
302,10 €
Inline flow divider tq 33-A 3 HAWE
- Online flow divider. - Flow rate 45 l/min. - 1/2" female thread. - Carbon steel material.
432,25 €
- With decompression. - D 5116 (02-2016-1.1). - Mounting on base plate not included. - Service pressure pmax: 500 bar. - Control flow Qmax: 2 l/min.
437,20 €
Male conical fitting 1/4 "pipe Ø 4 x 6
Nickel-plated brass quick connector. Swivel Tapered BSP Male Threads. Tube diameter: 4 x 6. 1/4 "thread.
2,20 €
Non-return valves and pre-fill valves belong to the group of block valves. Non-return valves block oil flow in one direction and open it in the opposite direction. The pre-fill valves are non-return valves with hydraulic release. They are used, for example, in presses with a movable upper plate for the front aspiration and emptying of the press cylinders when closing and opening in high speed. The type F check valve and pre-fill valve is a spring loaded poppet valve and is tight without oil leakage when closed. The valve is mounted directly on the cylinder and clamped between the bottom of the cylinder and the weld flange. As an alternative, the valve is mounted in the pipeline between the end faces of the weld flange. Valves of type F25 - F80 are available with decompression. A decompression suppresses the relaxation shocks that can occur when the pressure is high and the volume of the consumer is high.