Adapter male JIC thread 1"5/8 to male thread 1"7/8 UNF
- Closing part JIC cone 37º. - UNF part closure using O-ring. - Carbon steel material. - Dichromate surface treatment.
25,88 €
Adapter male JIC thread 1"5/8 to male thread 1"5/8 UNF
- Closing part JIC cone 37º. - UNF part closure using O-ring. - Carbon steel material. - Dichromate surface treatment.
18,17 €
Adapter male JIC thread 1"5/8 to male thread 1"5/16 UNF
- Closing part JIC cone 37º. - UNF part closure using O-ring. - Carbon steel material. - Dichromate surface treatment.
23,08 €
Adapter male JIC thread 1"5/16 to male thread 1"5/8 UNF
- Closing part JIC cone 37º. - UNF part closure using O-ring. - Carbon steel material. - Dichromate surface treatment.
52,17 €
90° elbow threaded nut M-18X150 to hydraulic pipe Ø 12 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-18X150.- For hydraulic pipe Ø 12 outside.- Light series.- Material forged steel.- Bichromated anti-oxidation treatment.
7,13 €
90° elbow threaded nut M-16X150 to hydraulic pipe Ø 10 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-16X150.- For hydraulic pipe Ø 10 outside.- Light series.- Material forged steel.- Bichromated anti rust treatment.
7,67 €
90° elbow threaded nut M-16X150 to hydraulic pipe Ø 8 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-16X150.- For hydraulic pipe Ø 8 outside.- Heavy series.- Material forged steel.- Bichromated anti rust treatment.
5,75 €
90° elbow threaded nut M-14X150 to hydraulic pipe Ø 8 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-14X150.- For hydraulic pipe Ø 8 outside.- Light series.- Material forged steel.- Bichromated anti-oxidation treatment.
5,88 €
This multifunctional mobile center, of particularly reduced size and price, allows to perform all the necessary operations for the preparation of hydraulic rigid pipes: internal and external deburring, bending, pre-assembly of rings conforming to DIN 2353 standard, 37° flaring of rigid stainless steel (AISI 316 TI) and carbon steel (ST 37,4) tubes for fittings conforming to SAE and JIC standards from 6 to 42 mm diameter with 4 mm thickness.
PREMOUNTING 24°. | 6 > 42x4 mm (0.236">1.654 "x0.158") |
FOLDED 37° | 6 > 42x4 mm (0.236">1.654 "x0.158") |
CURVATURE | 6 > 42x4 mm ( 0.236">1.655 "x0.158") |
CLEARING | MAX Ø 42x4 mm ( 1.654 "x0.158") |
MATERIALS | AISI 316 TI - ST 37.4 |
ACCESSORIES | |
SAFETY PROTECTION | Including |
CONTROL PANEL | Including |
OIL | Including |
TOOL RACK | Including |
SPECIAL VOLTAGE | Optional |
70,00 €