Adapter male JIC thread 1"5/8 to male thread 1"7/8 UNF
- Closing part JIC cone 37º. - UNF part closure using O-ring. - Carbon steel material. - Dichromate surface treatment.
25,88 €
Adapter male JIC thread 1"5/8 to male thread 1"5/8 UNF
- Closing part JIC cone 37º. - UNF part closure using O-ring. - Carbon steel material. - Dichromate surface treatment.
18,17 €
Adapter male JIC thread 1"5/8 to male thread 1"5/16 UNF
- Closing part JIC cone 37º. - UNF part closure using O-ring. - Carbon steel material. - Dichromate surface treatment.
23,08 €
Adapter male JIC thread 1"5/16 to male thread 1"5/8 UNF
- Closing part JIC cone 37º. - UNF part closure using O-ring. - Carbon steel material. - Dichromate surface treatment.
52,17 €
90° elbow threaded nut M-18X150 to hydraulic pipe Ø 12 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-18X150.- For hydraulic pipe Ø 12 outside.- Light series.- Material forged steel.- Bichromated anti-oxidation treatment.
7,13 €
90° elbow threaded nut M-16X150 to hydraulic pipe Ø 10 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-16X150.- For hydraulic pipe Ø 10 outside.- Light series.- Material forged steel.- Bichromated anti rust treatment.
7,67 €
90° elbow threaded nut M-16X150 to hydraulic pipe Ø 8 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-16X150.- For hydraulic pipe Ø 8 outside.- Heavy series.- Material forged steel.- Bichromated anti rust treatment.
5,75 €
90° elbow threaded nut M-14X150 to hydraulic pipe Ø 8 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-14X150.- For hydraulic pipe Ø 8 outside.- Light series.- Material forged steel.- Bichromated anti-oxidation treatment.
5,88 €
The set is supplied in a case and includes:
-Universal inflation checker "VGU" (Connection M28 x 1.50)
-Guide gauge kit from 0 to 25 bar; Gauge kit from 0 to 250 bar -Adapters for inflation valves (7/8 "- 5/8" - 8V1)
-Flexible long. 2.5 m, allows connection to the nitrogen source
-6 male Allen key
-Spare gaskets
-Manual
TECHNICAL CHARACTERISTICS
Maximum working pressure
TS2 up to 340 bar
TS6 up to 600 bar
Accumulator connection thread
7/8 "14 UNF - 5/8" 18 UNF - 8V1 - M28 x 1.50 (Allen 6) - FG ¼ ”CYL
Flexible 2.5 m long, G 1/4 "cylindrical fittings. Swivel nut at both ends to join the tester and the connection connector to the Nitrogen bottle
Nitrogen bottle connection
Ø 21.7 x 1.814 SI thread, with nitrogen bottle. Union joint - G 1/4 "
Pressure gauges
Ø 63 mm in glycerine bath, rear outlet G1 / 4 ". With connector for minimex connection.
Two scale units 0 ÷ 25 and 0 ÷ 250 bar. Accuracy 1.6%.