4,19 €
7,97 €
16,92 €
32,42 €
Tee sleeve for connecting 1 "1/2 hoses and 45 mm. Brass tube
Measurements: 1 "1/2 Ø Inside tube: 45 mm.
34,00 €
Closing plug with cone inner Ø 6 mm for rigid steel pipe
- Sealing plug for rigid steel pipe.- Working pressure 630 Bar.- For sealing on fittings DIN 2353 with inner cone Ø 6 mm.- To be assembled together with nut DIN 3870.- Material carbon steel.- Bichromated surface treatment.
1,04 €
Safety valve against overpressure 1/2" male thread at a pressure of 12 bar.
Manufactured according to the MIE-AP17 regulations of the precision apparatus regulation, being constructed by means of spring and total lifting seat.
22,29 €
- Connector for solenoid valve coils. - Class C (IEC 60664-1:2007-04). - Working Temperature -40ºC to 90ºC.
8,02 €
Supported temperatures:
- NBR (NITRILE) -30 to 120 ºC
- SILICONE -50 to 180 ºC
- VITON -30 to 230 ºC (High temperatures)
Types of elastomers used in manufacturing:
- NITRIC. Mixture based on nitrile rubber. With good resistance to the action of mineral oils and greases. Good resistance to abrasion. Suitable for the greatest types of uses.
- ACRYL-NITRILE-BUTADIENE. Greater heat resistance. But it has a higher permanent deformation.
- SILICONE. Very wide temperature range. Little permanent deformation. Low coefficient of friction. Not recommended for EP (Extreme Pressure) oils.
- FLUORINATED (Viton). It has the best chemical and high temperature resistance characteristics.