- Manual pump of simple effect. - Activation by lever. - Working pressure 700 Bar. - Flow per stroke 0.025 l/min. - Use in portrait or landscape mode. - Equipped with overpressure valve.
303,20 €
Double brake valve with hydraulic release LHK 22 G-21-.../...
- Double braking valve with hydraulic release. - Damped with regulation combination. - Flow 20 l/min. - Set pressure according to request. - Maximum pressure 400 bar. - 3/8" BSP connection thread.
508,17 €
- Control unit for valve BZ-10X. - With indicator light. - For activation of the power take-off and hydraulic valve of the tipper. - Cabin mounting. - 1/8" female air inlet thread.
99,80 €
- Coil for SUN solenoid valve. - Voltage 24 V DC. - Consumption 22 Watts. - Inner diameter Ø 19 mm. - Height 50mm.
69,56 €
2" BSP 60° male thread extension to fixed female with 1"1/2 BSP thread
- Male extension with 2" BSP 60° thread. - Fixed female with 1"1/2 BSP thread. - Material carbon steel. - Bichromate surface treatment.
31,07 €
2" BSP 60° male thread extension to fixed female with 1"1/4 BSP thread
- Male extension with 2" BSP 60° thread. - Fixed female with 1"1/4 BSP thread. - Material carbon steel. - Bichromate surface treatment.
29,60 €
1"1/2 BSP 60° male thread extension to fixed 2" BSP thread female
- Male extension with 1"1/2 BSP 60° thread. - Fixed female with 2" BSP thread. - Material carbon steel. - Bichromate surface treatment.
31,65 €
1"1/2 BSP 60° male thread extension to fixed 1"1/4 BSP thread female
- Male extension with 1"1/2 BSP 60° thread. - Fixed female with 1"1/4 BSP thread. - Material carbon steel. - Bichromate surface treatment.
30,29 €
Useful of great help for technicians, assemblers or repairers of hydraulic equipments, pneumatic or products micromechanical pressure.
Irreplaceable tools and practices avoiding the use of utensils to be inadequate or makeshift.
Composed by:
- Useful piercing: Can be used to extract o-rings from cavities or recesses difficult when the o-ring may be destroyed and removed.
- Useful application angle: Can be used to extract o-rings from cavities or recesses difficult to pry from the bottom of the cavity.
- Useful with application of flat face: This tool can be used to remove or install o-rings.
- Useful for pull / push: The particular shape of its tip allows many uses: can hook up, drop, push, or pull together the o-rings, or pressed into the cavity of your seat.
- Useful for placement: Ideal for positioning the o-ring or exraerla from difficult positions.
- Useful flat tip: Can be used to install or remove o-rings near the surface. It can also be used as a useful support in combination with other tires.
11,00 €
11,00 €
80,45 €