+34 682 460 188
Measurements: 1 "1/4.
Ø Inside tube: 30 mm.
Ø Inside tube: 30 mm.
Availability : En stock, normalmente enviado en un día laboral
LRAE11430
NG6 3E-CV bolt with 3/8" inlet and outlet threads
- Base plate for mounting 3 NG-6 valves. - With pressure regulation. - 3/8" inlet and outlet threads.
256,10 €
Pressure gauge Ø 40 from 0-12 Bar rear connection G 1/8".
9,82 €
Automatic air vent special for solar energy 3/8" male thread
10,88 €
- With 250 micron filling filter. - Aeration sponge 40 microns. - Length 150mm. - 6 fixing screws.
25,90 €
Transparent diesel filter cartridge 5 microns for FG-100
- Replacement filter cartridge for FG-100. - Filtration 5 microns. - Paper filter element. - Filtering capacity 500,000 liters. - Flow rate 105 l/min. - Includes closing gaskets.
90,18 €
Manual ball valve with 1/4" female thread handle
64,39 €
- ROTEX® is a torsionally elastic claw coupling. It is suitable for compensating for shaft misalignments, e.g. caused by manufacturing inaccuracies, heat expansion, etc. - The hubs are supplied unmachined. - Fun steel material
274,78 €
Radial spherical plain bearing with seal
- Outer Ø 75 mm.- Inner Ø 50 mm.- Height 35 mm.
14,86 €
Availability : En stock, normalmente enviado en un día laboral
LRAE11430
- Brass is an alloy composed mainly of copper and zinc, with an approximate proportion of 60% copper and 40% zinc.
- Manufacture by hot stamping with brass.
- According to standard UNE-EN-12165 CW617N.
- Suitable for drinking water.
- Tensile strength 350N / m / m2 Min.
- Elongation 15% min.
- Hardness HB 80% approximate.
- It does not alter at temperatures between -100ºC and 200ºC nor does it degrade with light.
- Corrosion resistant.
The prices shown on the website do not include VAT
The shipping costs are calculated automatically in the cart according to the weight of the product and the place of delivery
