1" 1/2 BSP nut with 30° reverse seating cone R1, R2 and 4SP
- Fitting to press on hose.- Japanese series, TOYOTA type- 1"1/2 BSP nut nut thread.- For hose inner Ø 38,1 mm.- Inverted seat cone 30°.- Carbon steel material.- Bichromated surface treatment.
41,55 €
3/4" BSP nut with 30° inverted seat cone R1, R2 and 4SP
- Fitting to press on hose.- Japanese series, TOYOTA type- 3/4" BSP nut thread.- For hose Ø 19 mm inside.- Inverted seat cone 30°.- Carbon steel material.- Bichromated surface treatment.
11,53 €
1" BSP nut with 30° reverse seating cone R1, R2 and 4SP
- Fitting to press on hose.- Japanese series, TOYOTA type- 1" BSP nut nut thread.- For hose Ø 25,4 mm.- Inverted seat cone 30°.- Carbon steel material.- Bichromated surface treatment.
32,38 €
1" 1/4 BSP nut with 30° reverse seating cone R1, R2 and 4SP
- Fitting to press on hose.- Japanese series, TOYOTA type- Thread nut nut 1"1/4 BSP.- For hose inner Ø 31,8 mm.- Inverted seat cone 30°.- Carbon steel material.- Bichromated surface treatment.
26,60 €
1/2" BSP nut nut with 30° inverted seat cone R1, R2 and 4SP
- Fitting to press on hose.- Japanese series, TOYOTA type- Thread nut nut 1/2" BSP.- For hose inner Ø 12,7 mm.- Inverted seat cone 30°.- Carbon steel material.- Bichromated surface treatment.
5,25 €
Cylindrical nut 3/8" BSP with reverse seating cone 30° R1, R2 and 4SP
- Fitting to press on hose.- Japanese series, TOYOTA type- 3/8" BSP nut thread.- For hose Ø 9,5 mm.- Inverted seat cone 30°.- Carbon steel material.- Bichromated surface treatment.
16,90 €
Low pressure 60° BSP conical seat nipple for hose inner Ø 19 mm
- Low pressure 60° BSP conical seat nipple.- Nipple for 3/4" nut (NOT INCLUDED)- For 19 mm inner Ø hose.- Carbon steel material.- Without nut.- Bichromated surface treatment.
4,30 €
Forged elbow adapter 90° adjustable male thread 1"1/2 BSP seat 60°
- Male 90° forged elbow with 1"1/2 BSP thread, 60° seat. - 1"1/2 BSP adjustable male and sealing joint. - Forged with stamp. - Material carbon steel. - Bichromate surface treatment.
151,95 €
Availability : En stock, normalmente enviado en un día laboral
S551510
- PM3 55:1 pump - 50 kg drum (h: 500 mm)
- Model: PM 3-55:1/510.
- Fluids: Grease.
- Weight 3.7 kg.
- Tube height: 510 mm.
- Materials for wet areas: NBR, Steel, Zinc, PTFE.
- Flow rate: 300g/min.
- Maximum outlet pressure: 550 bar.
- Total height: 710 mm.
- Pump mount for drum: 50 kg (120 lb).
- Maximum flow rate at free outlet: 540 g/min.
- Air pressure: 1.5 - 10 bar.
- Air consumption: 165 l/min.
- 1/4" NPSM air inlet thread.
- Effective diameter of air motor: 70 mm.
- Noise level: 92 dB.
The prices shown on the website do not include VAT
The shipping costs are calculated automatically in the cart according to the weight of the product and the place of delivery
+34 682 460 188
