M-14X150 Male Adapter to M-16X150 Idler Nut Heavy Series
- DIN 2353 standard. - Heavy series. - Working pressure 160 Bar. - Carbon steel material. - Dichromate surface treatment.
5,21 €
M-14X150 Male Adapter to M-16X150 Idler Nut Light Series
- DIN 2353 standard. - Light series. - Working pressure 160 Bar. - Carbon steel material. - Dichromate surface treatment.
4,96 €
M-16X150 Male Adapter to M-18X150 Idler Nut Heavy Series
- DIN 2353 standard. - Heavy series. - Working pressure 160 Bar. - Carbon steel material. - Dichromate surface treatment.
6,08 €
M-12X150 Male Adapter to M-18X150 Idler Nut Light Series
- DIN 2353 standard. - Light series. - Working pressure 160 Bar. - Carbon steel material. - Dichromate surface treatment.
5,92 €
M-16X150 Male Adapter to M-18X150 Idler Nut Light Series
- DIN 2353 standard. - Light series. - Working pressure 160 Bar. - Carbon steel material. - Dichromate surface treatment.
5,92 €
M-12X150 Male Adapter to M-52X200 Idler Nut Light Series
- DIN 2353 standard. - Light series. - Working pressure 160 Bar. - Carbon steel material. - Dichromate surface treatment.
47,42 €
M-14X150 Male Adapter to M-52X200 Idler Nut Light Series
- DIN 2353 standard. - Light series. - Working pressure 160 Bar. - Carbon steel material. - Dichromate surface treatment.
47,42 €
M-16X150 Male Adapter to M-52X200 Idler Nut Light Series
- DIN 2353 standard. - Light series. - Working pressure 160 Bar. - Carbon steel material. - Dichromate surface treatment.
47,42 €
DESCRIPTION
The manual pump 25057 is perfectly adapted for use with progressive dividers. The lubricant is introduced in the circuit by operating the handle which is linked to a single action piston. An integrated manual release valve offers possibility to use it with volumetric oil injectors (PDI). For grease, a filler port is located at the bottom of the pump body. The reservoir is also equipped with a follower plate.
OPERATION
Operate the handle as often as required to fill the circuit. For progressive application, check movement of indicator pin which is mounted on the primary divider. For volumetric application, it is recommended to install a pressure gauge on the pump outlet to check oil pressure which must be 35 bar maxi
FEATURES
Discharge :................................................................................................................................................ 1 cm3/stroke
Pressure :.................................................................................................................................................. 210 bar max.
Reservoir capacity :................................................................................................................................................. 1 Kg
Working temperature :......................................................................................................................... 5°C to 50 °C max.
Lubricant to be used :...............for progressive system : Worked penetration W >265 Mineral oil viscosity 200 Cst (mini at 20°C).
for volumetric system : Worked penetration > 445 Mineral oil with 200 (Cst mini at 20°C).