Pneumatic pilot valve 5/2 thread 1/4".
67,64 €
Pneumatic pilot valve 5/2 ways thread 1/8".
- Pneumatic valve for compressed air.- Thread 1/8"- 5/2 ways.- Minimum working pressure 2,5 Bar.- Pneumatic piloting.- Working pressure 10 BAR.- Working temperature -10º + 60º.- Nominal diameter 5 mm.
54,28 €
M5 cylindrical male threaded silencer in sintered polyethylene
- Synthesized polyethylene silencer.- With plastic thread.- Male M-5 cylindrical thread.- Operating pressure min/max 0 bar / 10 bar.- Ambient temperature min/max -25°C / +80°C.- Medium Compressed air.
0,84 €
Hydraulic pressure tapping fitting Minimex male thread 1/2" BSP
- Hydraulic pressure tapping fitting minimex.- Protective plastic cap.- Working pressure 630 Bar.- Male thread 1/2" Bsp.- Pressure tapping thread M-16X200.
9,90 €
1,84 €
1,30 €
2,15 €
4,65 €
DESCRIPTION
The pump is mainly used in machines, small and medium-sized enterprises that do not require more than 30 points respectively and equipped with dispensers of the type F (resistance system).
OPERATION
The pump is operated manually and it works as an accumulator.
By pressing on the lever compresses a spring llanando a cylinder with an amount of oil by default. When you release the lever, a piston pushed by the spring force of the circulation of the oil in the ducts. The oil volume is accurately measured regardless of viscosity.
FEATURES
- Flow rate: adjustable from 1 to 5 cm3/stroke (adjustment screw and lock nut on the tank).
- Pressure: 5 bar. max.
- Tank: capacity: 475 cm3.
- Filter: Mounted on the aspiration filtration to 40 microns. Must be inspected regularly and replaced once a year.
- Limits of the system: it Is possible to lubricate in function of the flow per cycle of the pump.
The viscosity of the oil at the temperature of operation must be between 30 and 1500 cSt.