JIC male thread 7/16" JIC compression fitting for hose inner Ø 6.4 mm
- JIC male thread 7/16" JIC compression fitting.- 37° JIC male locking cone.- For hose Ø 6,4 mm inside. - Material carbon steel.- Bichromated surface treatment.
3,74 €
JIC male thread 9/16" JIC compression fitting for hose inner Ø 7,9 mm
- JIC male thread 9/16" JIC compression fitting.- JIC 37° male locking cone.- For hose inner Ø 7,9 mm. - Material carbon steel.- Bichromated surface treatment.
3,24 €
Fixed male press fitting 2" BSP R1, R2 and 4SP Ø inside 50.8 mm
- 2" BSP male threaded press fitting. - 60° cone closure. - For Ø 50.8 mm hose, interior. - Material carbon steel. - Bichromate surface treatment. - Complies with norm 1.0737 (EN 10.277-3) Standard series.
55,25 €
Fixed male press fitting 1"1/2 BSP R1, R2 and 4SP Ø inside 38.1 mm
- 1"1/2 BSP male threaded press fitting. - 60° cone closure. - For Ø 38.1 mm hose, interior. - Material carbon steel. - Bichromate surface treatment. - Complies with norm 1.0737 (EN 10.277-3) Standard series.
39,29 €
Fixed male press fitting 2" BSP R1, R2 and 4SP Ø inside 38.1 mm
- 2" BSP male threaded press fitting. - 60° cone closure. - For Ø 38.1 mm hose, interior. - Material carbon steel. - Bichromate surface treatment. - Complies with norm 1.0737 (EN 10.277-3) Standard series.
59,55 €
Fixed male press fitting 1"1/4 BSP R1, R2 and 4SP inner Ø 25.4 mm
- 1"1/4 BSP male threaded press fitting. - 60° cone closure. - For Ø 25.4 mm hose, interior. - Material carbon steel. - Bichromate surface treatment. - Complies with norm 1.0737 (EN 10.277-3) Standard series.
32,80 €
Fixed male press fitting 1"1/4 BSP R1, R2 and 4SP Ø inside 31.8 mm
- 1"1/4 BSP male threaded press fitting. - 60° cone closure. - For Ø 31.8 mm hose, interior. - Material carbon steel. - Bichromate surface treatment. - Complies with norm 1.0737 (EN 10.277-3) Standard series.
19,70 €
Fixed male press fitting 1"1/2 BSP R1, R2 and 4SP Ø inside 31.8 mm
- 1"1/2 BSP male threaded press fitting. - 60° cone closure. - For Ø 31.8 mm hose, interior. - Material carbon steel. - Bichromate surface treatment. - Complies with norm 1.0737 (EN 10.277-3) Standard series.
34,55 €
High performance manual lever grease pump for professional use. Pump head made of cast iron, pump mechanism with rectified steel piston for high pressure delivery of grease with air vent valve
Drive lever with non-slip grip. Fat push plunger forming a body
with the rod to force the priming of the pump. Suitable for filling with cartridge, bulk or dispenser.
Steel grease tank with non-slip knurling and locking system for the draw rod by means of
pin (it does not allow the dipstick to be retracted inside with a full tank).