90° elbow threaded nut M-52X150 to hydraulic pipe Ø 42 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-52X200.- For hydraulic pipe Ø 42 outside.- Light series.- Material forged steel.- Bichromated anti-oxidation treatment.
51,29 €
90° elbow threaded nut M-52X150 to hydraulic pipe Ø 38 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-52X200.- For hydraulic pipe Ø 38 outside.- Heavy series.- Material forged steel.- Bichromated anti rust treatment.
122,42 €
90° elbow threaded nut M-45X200 to hydraulic pipe Ø 35 outside DIN 2353
- 90º elbow nut nut to hydraulic pipe DIN 2353.- Thread nut nut M-45X200.- For hydraulic pipe Ø 35 outside.- Light series.- Material forged steel.- Bichromated anti-oxidation treatment.
37,50 €
Single-acting pneumatic cylinder with piston diameter 25 mm
- Single-acting pneumatic cylinder. - Front spring. - Piston diameter Ø 25 mm. - Stroke 50 mm. - Material of the stem and sleeve stainless steel. - Working temperature 0ºC to +80ºC. - Working pressure from 1 Bar to 10 Bar.
75,45 €
- PVDA-LAN pressure reducing cartridge valve
- Mounting in T-21A cavity. - Pilot operated. - Adjustment using allen screw. - Adjustment from 7 to 210 Bar. - Nitrile gasket material.
287,86 €
Pressure regulating valve for threading in block Hawe CDK 3 51
- Pressure regulator valve for threading into a block. - Block not included. - Flow rate 12 l/min. - Pressure regulation from 15 to 165 BAR. - Adjustable with tool.
226,00 €
Flexible 1/4" double textile braid tubing
SELLING PRICE PER METER: 1 UNIT = 1 METER
4,63 €
Flexible tubing 3/16" double textile braid
SELLING PRICE PER METER: 1 UNIT = 1 METER
5,96 €
The wide field of application of the temporomandibular disorders 5 of the pump is especially ideal for machines having around 50 lubrication points (see technical information). The TMD 5 is interchangeable with the L 18P convenient for customers who wish to switch from automatic to manual system or vice versa.
FUNCTIONING
The TMD 5 is an automatic system driven by a piston motor with a discharge spring. The geared motor in the assembly determines the discharge of the piston cycle time that distributes the oil through the system. TMD 5 is equipped with a low level switch socket.
CHARACTERISTICS
Engine: ................................................ .................................................. ............. synchronized single phase 50/60 Hz-3 W
115V: connect wires to output terminal 5 and 6
220V: connect wires to output terminal 4 and 6
Download: ................................................ .................................................. ........................................... 1 to 5 cm³ / cycle
Setting: ................................................ .................................................. pumps are delivered preset in 5 cm³
To reduce discharge, lift stop ring and turn knob until required discharge is engraved on adjusting screw shank.
Pressure: ............................................... .................................................. ............................................... 2 to 4 pubs.
Pressure varies depending on the number of meter units in the system.
Tank capacity of: ............................................. .................................................. ................................. 1.8 L
Electrical low level switch: ............................................ .................................................. ............ 220 V max.
Nominal power: ............................................... .................................................. .......................................... 0.15 A
The pumps are supplied with closed contact in the position of connecting the wire to terminal 2 and 3
Filter: ................................................ .................................................. . mounted on oil intake, filtration 40 µm
Limit systems: .... The number of points that can be lubricated depends on the discharge per cycle of the pump.