The marking machine HP1N is a computer tire pressure for marking ferrules up to a diameter of 2". It is equipped with three springs that allow you to increase or decrease the strength of marking.
2 417,70 €
The MB20 marker is a manual pressure equipment for marking bushings up to a diameter of 2 ". It is equipped with three springs that allow increasing or decreasing the marking force.
1 748,00 €
9,30 €
Tire inflation gun with analog pressure gauge and rubber shock protection. Includes calibration certificate Approved for gas stations and workshops Includes hose with charging valve. Download button.
113,90 €
LOCTITE UNIVERSAL 60 SECONDS 20gr
11,70 €
Product that produces an instant start with ignition progressive.
9,60 €
Defroster glass with scraper.
10,75 €
Fluid cooling pure concentrate. In carafe of 25 litres
293,70 €
| Pump flow | L / min. 1,500 RPM (US CPM 1500 RPM) | 1.5 (0.40) |
| Displacement | cm3 / v - cc / rev (in3 / rev) | 1 (0.06) |
| Max Pressure keep going | Pub (PSI) | 275 (3,990) |
| Max Pressure inter 5 sec. max. | Pub (PSI) | 300 (4,350) |
| RPM at continuous pressure | 5,000 | |
| Maximum RPM | 6,000 | |
| Minimum RPM according to pressure | 100 bar (1,450 PSI) | 1,000 |
175 bar (2,540 PSI) | 1,500 | |
205 bar (3,625 PSI) | 2,000 | |
300 bar (4,350 PSI) | 3,000 | |
| Recommended oil | ISO 6743 type HM, HV or HG | |
| Viscosity | ISO 3448 cat. VG32-VG46 | |
| Oil cleanliness degree | 19/16 s. ISO 4406 or RP70H | |
| Oil working temperature | -20 ° C ... + 80 ° C -4 ° F ... + 173 ° F | |
| Maximum suction depression | <0.3 bar |
The prices shown on the website do not include VAT
The shipping costs are calculated automatically in the cart according to the weight of the product and the place of delivery
+34 682 460 188
