Safety valve against overpressure 3/8" male thread at a pressure of 12 bar.
Manufactured according to the MIE-AP17 regulations of the precision apparatus regulation, being constructed by means of spring and total lifting seat.
16,21 €
Safety valve against overpressure 1/4" male thread at a pressure of 12 bars
Manufactured according to the MIE-AP17 regulations of the precision apparatus regulations, being constructed with a spring and a total lifting seat.
12,21 €
Safety valve against overpressure 1/8" male thread at a pressure of 12 bar.
Manufactured according to the MIE-AP17 regulations of the precision apparatus regulation, being constructed by means of spring and total lifting seat.
10,60 €
Safety valve against overpressure 1/4" male thread at a pressure of 10 bars
Manufactured according to the MIE-AP17 regulations of the precision apparatus regulations, being constructed with a spring and a total lifting seat.
10,60 €
Safety valve against overpressure 1/2" male thread at a pressure of 12 bars
Manufactured according to the MIE-AP17 regulations of the precision apparatus regulations, being constructed with a spring and a total lifting seat.
22,29 €
Metal silencer for compressed air male thread 2" BSP or NPT
- Metal silencer for compressed air. - Aluminum body material/dichromated steel components/cellulose fiber mesh. - Maximum pressure 12 Bar. - Reduces air exhaust noise. - 2" BSP or NPT male thread.
159,09 €
Metal silencer for compressed air male thread 1"1/2 BSP or NPT
- Metal silencer for compressed air. - Aluminum body material/dichromated steel components/cellulose fiber mesh. - Maximum pressure 12 Bar. - Reduces air exhaust noise. - 1"1/2 BSP or NPT male thread.
160,87 €
Metal silencer for compressed air male thread 1"1/4 BSP or NPT
- Metal silencer for compressed air. - Aluminum body material/dichromated steel components/cellulose fiber mesh. - Maximum pressure 12 Bar. - Reduces air exhaust noise. - 1"1/4 BSP or NPT male thread.
103,98 €
The HSE type clamping cylinder is a screw-in cylinder. type HSA is a screwdriver cylinder. Very large forces can be transmitted in the devices in a minimal installation space.
The HSE and HSA hydraulic cylinders are single effect elements, provided with recovery springs, for use in hydraulic devices and many other hydraulic systems, when it is necessary to concentrate large energies in a very small space in case of short distances.
- Construction of devices, suction and clamping of work pieces (production and assembly facilities).
- Construction of machine tools, mooring of carriages and guides, to immobilize circular tables, etc.
- Forming without chip removal, bending, stamping, punching and cutting.
The surface of the steel housing of the tensioning rollers is treated against corrosion. Diver pistons with internal stop are hardened and ground. The oil flow is through the main body.
| MODEL | PISTON Ø d mm | Career h mm | Hermetization of the casing | Spring recovery pressure (bar) | Fixation | Mass weight approx. Kg | |
| Extended | Retracted | Threaded into a main body | |||||
| HSE122 | 12 | 2 | Cutting edge | 6 | 3 | 0.05 | |
| HSE125 | 5 | Ring seal 20x24x1.5 DIN 7603-Cu | 6.5 | 3 | 0.06 | ||
| HSE128 | 8 | 5 | 2 | 0.08 | |||
| HSE163 | 16 | 3 | Cutting edge | 5.5 | 3 | 0.08 | |
| HSE168 | 8 | Ring seal 24x29x2 DIN 7603-Cu | 7 | 3.5 | 0.09 | ||
| HSE1612 | 12 | 6.5 | 3.5 | 0.12 | |||
| HSE204 | twenty | 4 | Cutting edge | 6 | 3.5 | 0.14 | |
| HSE2010 | 10 | Ring seal 30x36x2 DIN 7603-Cu | 7 | 3 | 0.2 | ||
| HSE2015 | fifteen | 5.7 | 2.5 | 0.25 | |||
| HSE2020 | twenty | 6.5 | 2.5 | 0.3 | |||
| HSE245 | 24 | 5 | O-ring 37x2.5xNBR 90Sh and ring support of steel | 6 | 4.5 | 0.25 | |
| HSE2415 | fifteen | 7 | 3.5 | 0.4 | |||
| HSE2420 | twenty | 6 | 4 | 0.5 | |||
| HSA3220 | 32 | twenty | O-ring 34x3 NBR 90 Sh | 5 | 1 | Bolted onto a main body | 1.6 |
| HSA4025 | 40 | 25 | O-ring 44x5 NBR 90 Sh | 4.5 | 1 | 2.5 | |
Designation: Single acting cylinder with spring return.
Mounting position: Indistinct.
Surface treatment: It is not allowed on the piston in the axial direction and in the retracted state. If available, retain by external stop. Likewise, always avoid lateral forces on the piston.
Hydraulic fluid: Hydraulic oil according to DIN 51.524, parts 1-3; ISO VG 10 to 68 according to DIN 51519. Viscosity range: min. approx. 4; max. approx 1500 mm 2 / s. Optimal service: approx. 10 ... 500 mm 2 / s. Also suitable for biodegradable hydraulic fluids of the HEPG (polyalkylene glycol) and HEES (synthetic ester) type at operating temperatures up to approx. + 70 ° C.
Temperatures: Ambient: approx. -40 ... +80 ° C; Oil: -25 ... + 80 ° C, pay attention to the viscosity range. Allowable start-up temperature down to -40 ° C.
The prices shown on the website do not include VAT
The shipping costs are calculated automatically in the cart according to the weight of the product and the place of delivery
+34 682 460 188
